Cast steel shot S460 abrasive for surface treatment

Cast Steel Shot S460 Abrasive for Surface Preparation    We are the only one in China which the steel shot contain Cr element,Cr element make the steel shot good tenacity,crush and fatigue resistant,make the long lifetime can reach 3000 times,it is high cost performance product in the current market and used very

Featured Products

Cast Steel Shot S460 Abrasive for Surface Preparation
 

   We are the only one in China which the steel shot contain Cr element,Cr element make the steel shot good tenacity,crush and fatigue resistant,make the long lifetime can reach 3000 times,it is high cost performance product in the current market and used very well by our more than 90 countries customers all around the world.

 

1.Steel shot Application

steel shot blasting

Steel shots used for Engineering machinery
Steel shots used for Machinery cleaning can effectively remove the rust, welding slag, and oxide skin, eliminate the welding stress,and increase basic binding force between rust removing coating and the metal ,thus greatly enhancing the derust quality of engineering machinery spare part.

Steel shot size for Stainless steel plate cleaning
Steel shot size to achieve clean, luminous, exquisite burnish surface treatment of stainless steel plate, it is a must to select the suitable abrasive materials to remove the scale from cold rolled stainless steel surface.
According to different grades,the stainless steel surface needs to select different diameter abrasives and proportion to process. Compared to the traditional chemical process, it could lower the cleaning cost and achieve green production.


Cast Steel Shot S460 Abrasive for Surface Preparation

 2.Steel Shot Specification

 

Productsteel shot
Chemical CompositionC0.80-1.20%
Cr0.26%
Si0.20-1.20%
Mn0.15-1.20%
S≤0.05%
P≤0.05%
HardnessGP40~50 HRC (377~540HV)
GH53~60 HRC (510~710HV)
GL>60 HRC (>710HV)
Hardness DeviationMax Deviation±3.0HRC,±40HV
MicrostructureEven tempered Martensite and dispersed carbon
Denisty7.4g/cm3

 

3.Steel shot Production Process


Cast Steel Shot S460 Abrasive for Surface Preparation

 

4.Steel Shot Picture


   We are the only one in China which the steel shot contain Cr element,Cr element make the steel shot good tenacity,crush and fatigue resistant,make the long lifetime can reach 3000 times,it is high cost performance product in the current market and used very well by our more than 90 countries customers all around the world.Cast Steel Shot S460 Abrasive for Surface Preparation


5.Steel Shot Certificate and Testing

Cast Steel Shot S460 Abrasive for Surface Preparation


Cast Steel Shot S460 Abrasive for Surface Preparation

6.Steel shot Normal Packaging

 

 1.25kg per bag(pp bag or paper bag), then 40 bags put in a 1000kg (2200lb) bulk bag.

  2.25 kg per bag(pp bag or paper bag), then 40 bags shrink wrapped onto a 1000kg

(2200lb) pallet.

  3.25 kg per bag(pp bag or paper bag), then 40 bags in one box.

  4.One ton one bag.

  5.1000kg loose in one ton bulk bag.

  6.Gnerally, one 20GP can load 25 tons, 27 tons at most.

 

  Cast Steel Shot S460 Abrasive for Surface Preparation

  All pakages are lined with waterproof materials.

 

  We can also pakage according to costomers' requirements.
 

 7.Our Service 

 

  1. Sample Service

 

  2.Customerized Service

 

  3.After-sale Service

 

 

8.Company Profile

 

 

Jinan Junda Indutrial Technology Co,.Ltd. is located in Jinan , Shandong Province, China,

which is the daughter cmpany of Honest Horse(CHINA) Holding Limited. We are the manuf-

-acturers of abrasives media for 15 years experience in north China.

 

   Our products include bearing steel grit , cast stel gritsteel shotsteel ct wire shot 

and garnetsand abrasives.They are widely used in sandblasting, stone gang saw cutti-

-ng, waterjet cutting, water filtration fields.


Cast Steel Shot S460 Abrasive for Surface Preparation




 

   

So far we have almost 15 years experience and our customers spread over 100 countries

around the worldthat distributein AsiaNorth AmericaSouth America and Austrilia, also

in Africa.

 

The products reach the ISO9001 standard,SAE and always enjoy a good reputation a-

-mony our customers.We welcome customers all over the world do cooperation with us.

 

8.FAQ

 

 Q.  What is the mode of your payment?

T/T: 50% advance payment and the rest 50% payment oay us when you get the scanned

B/L from our E-mail.

L/C:100% irrevocable L/C at sight.

 

Q. What's the MOQ of your product?

As usual MOQ is 5TONS.Or as your require, we need to calculate the new price to you.

 

Q. Can you provide the free samples?

Yes, we can send free samples less than 500g to you. Normally, we can send samples

to customer byexpress, such as DHL,TNT,Fedex,Aramex, etc.

 

Q. What atandars you carring out for your products?

SAE standard and ISO9001SGS.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours