Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive

Sandblast/Cast Steel Shot S330 Shot Blasting Abrasive We are the only one in China which the steel shot contain Cr element,Cr element make the steel shot good tenacity,crush and fatigue resistant,make the long lifetime can reach 3000 times,it is high cost performance product in the current market and used very well by our m

Featured Products

Sandblast/Cast Steel Shot S330 Shot Blasting Abrasive

 We are the only one in China which the steel shot contain Cr element,Cr element make the steel shot good tenacity,crush and fatigue resistant,make the long lifetime can reach 3000 times,it is high cost performance product in the current market and used very well by our more than 90 countries customers all around the world.
 

1.Steel shot Application

 

· blast castings, in order to remove the molding sand;

· blast metal sheet plates and sections, in order to remove the metallurgic mill scale;

· blast metallurgic products, in order to remove risers;

· clean off steel constructions and aluminum rims;

· metal surface strengthening .

Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive
 



2.Steel Shot Specification

Productsteel shot
Chemical CompositionC0.80-1.20%
Cr0.26%
Si0.20-1.20%
Mn0.15-1.20%
S≤0.05%
P≤0.05%
HardnessGP40~50 HRC (377~540HV)
GH53~60 HRC (510~710HV)
GL>60 HRC (>710HV)
Hardness DeviationMax Deviation±3.0HRC,±40HV
MicrostructureEven tempered Martensite and dispersed carbon
Denisty7.4g/cm3

 

3.Steel shot Production Process


Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive
Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive

 

4.Steel Shot Picture

Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive


 


5.Steel Shot Certificate and Testing

Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive
Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive



Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive
 


 

6.Steel shot Normal Packaging

 

 1.25kg per bag(pp bag or paper bag), then 40 bags put in a 1000kg (2200lb) bulk bag.

  2.25 kg per bag(pp bag or paper bag), then 40 bags shrink wrapped onto a 1000kg

(2200lb) pallet.

  3.25 kg per bag(pp bag or paper bag), then 40 bags in one box.

  4.One ton one bag.

  5.1000kg loose in one ton bulk bag.

  6.Gnerally, one 20GP can load 25 tons, 27 tons at most.

Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive
Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive

 

  

  All pakages are lined with waterproof materials.

 

  We can also pakage according to costomers' requirements.
 

 7.Our Service 

 

  1. Sample Service

 

  2.Customerized Service

 

  3.After-sale Service

 

 

8.Company Profile

 

 Jinan Junda Indutrial Technology Co,.Ltd. is located in Jinan , Shandong Province, China,

which is the daughter cmpany of Honest Horse(CHINA) Holding Limited. We are the manuf-

-acturers of abrasives mediafor  15 years experience in north China.

 

   Our products include bearing steel grit , cast stel gritsteel shotsteel ct wire shot 

and garnetsand abrasives.They are widely used in sandblasting, stone gang saw cutti-

-ng, waterjet cutting, water filtration fields.

Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive

 

So far we have almost 15 years experience and our customers spread over 100 countries

around the worldthat distributein AsiaNorth AmericaSouth America and Austrilia, also

in Africa.

Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive
 

The products reach the ISO9001 standard,SAE and always enjoy a good reputation a-

-mony our customers.We welcome customers all over the world do cooperation with us.

 

8.FAQ

 

 Q.  What is the mode of your payment?

T/T: 50% advance payment and the rest 50% payment oay us when you get the scanned

B/L from our E-mail.

L/C:100% irrevocable L/C at sight.

 

Q. What's the MOQ of your product?

As usual MOQ is 5TONS.Or as your require, we need to calculate the new price to you.

 

Q. Can you provide the free samples?

Yes, we can send free samples less than 500g to you. Normally, we can send samples

to customer byexpress, such as DHL,TNT,Fedex,Aramex, etc.

 

Q. What atandars you carring out for your products?

SAE standard and ISO9001SGS.
 


Sandblast Steel Shot Sizes Surface Treatment Surface Polishing Descaling Blasting Media Metal Abrasive Cast Steel Shot S330 Shot Blasting Abrasive
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours