Steel Structures Abrasive Blasting Room Cleaning Blasting Equipment
Sand blasting room is mainly used for surface cleaning and strengthening of steel, castings, aluminum alloy parts and other parts. Through the shot blasting can remove the complex work piece surface contamination, the oxide skin, welding slag, the waste paint and so on, causes the work piece surface to be bright and clean, simultaneously reduce the work piece internal stress, enables the work piece surface to obtain the strengthening, thus achieves enhances the work piece surface and the intrinsic quality goal.
1. Abrasive blasting room main compositions
2. Structural characteristice of Sand Blasting Booths
This machine is a special reciprocating sand blasting machine, which consists of Sand blasting chamber, Sand blasting device, Screw conveyor, Elevator, Separator, Abrasive recycling system, Trolley system, Lighting system, Bottom funnel, Steel grating, Dust removal system, Electric control system, etc.
Abrasive blasting system
We fully take into account the operation convenience of the workers, specifically increased the sand blasting chamber operating space, set lighting system and platform, so that workers can operate convenient, effective and comprehensive.
Abrasive recycling system
The honeycomb floor self recovery sand blasting booths is used to the workpiece surface blasting treatment. After the process of sand blasting, to remove rust off workpiece surface, improve the adhesion on the surface of the workpiece.
As the honeycomb floor has no moving mechanical parts, there is nothing to wear out or breakdown, resulting in virtually 100% room availability.
The pneumatic conveying principal of the honeycomb floor also means that the abrasive is instantaneously recovered from the floor, eliminating abrasive "dead spots" and overcoming the need for large amounts of abrasive in storage.
Dust removal system
This machine adopts Cartridge or bag type dust collector, is exhausted air produced during working. The dedusting efficiency is up to 99.6%, powder density is less than 100mg/m3,much stricter than the national standard.
Electric control system
Set shot ball circulatory failure alarm function, if any parts of the system fails, the above components automatically stop running, to prevent the shot ball stuck and burning power device.
Our service:
Notice:
According to your requirements, the most suitable machine will be designed for your workpieces, please indicate the following details.
1. What kind of workpiece you clean?
2. The workpiece size, length, width, height and weight of maximum workpiece.
3. What's your production capacity per day (8 hours)?
Based on this detailed information, the detailed technical proposals will be sent to you for reference.
FAQ:
After-sale service:
1. Installation and commissioning issue: We will send one technicians to assist with machine installation and commissioning, customer pays for return tickets, hotel and diet. Customer need arrange skilled worker and prepare various installation machinery and tools.
2. Warranty time:12 months from date of commissioning completion, but no more than 18 months from date of delivery.
3. Supply full english documents: including general installation drawings, pit design drawings, manual book, electric wiring diagram, electric manual book and maintenance book, etc.
4. Exported experience : Many countries, such as The USA, Russia, UK, Ukraine, Australia, Malaysia, UAE, Egypt, Mexico, Brasil, etc.
5. Our shot blasting spare parts are high quality with Cr20S High Chrome, ZGMn13, Mn65, etc.
Trade Information:
MOQ: 1set.
Settlement Currency: USD, RMB, EUR.
Trade mode: FOB (FCA), CIP, CFR, CIF, DDU, DDP, Turnkey.
Payment term: 30% deposit by T/T, the balance paid before delivery or L/C at sight.
Delivery time: Within 20-60 days according to different type equipment.
Any question pls kindly contact with us and welcome to visit our factory!
George Xu
Cell: 86 13310666957
Sand blasting room is mainly used for surface cleaning and strengthening of steel, castings, aluminum alloy parts and other parts. Through the shot blasting can remove the complex work piece surface contamination, the oxide skin, welding slag, the waste paint and so on, causes the work piece surface to be bright and clean, simultaneously reduce the work piece internal stress, enables the work piece surface to obtain the strengthening, thus achieves enhances the work piece surface and the intrinsic quality goal.
1. Abrasive blasting room main compositions
| 1 | Blasting chamber |
| 2 | Abrasive storage hopper |
| 3 | Blasting assembly |
| 4 | Separator |
| 5 | Abrasive recycling system |
| 6 | Lighting system |
| 7 | Dust Collector |
| 8 | Steel grating |
| 9 | Trolley system |
| 10 | Electric control system |
2. Structural characteristice of Sand Blasting Booths
This machine is a special reciprocating sand blasting machine, which consists of Sand blasting chamber, Sand blasting device, Screw conveyor, Elevator, Separator, Abrasive recycling system, Trolley system, Lighting system, Bottom funnel, Steel grating, Dust removal system, Electric control system, etc.
Abrasive blasting system
We fully take into account the operation convenience of the workers, specifically increased the sand blasting chamber operating space, set lighting system and platform, so that workers can operate convenient, effective and comprehensive.
Abrasive recycling system
The honeycomb floor self recovery sand blasting booths is used to the workpiece surface blasting treatment. After the process of sand blasting, to remove rust off workpiece surface, improve the adhesion on the surface of the workpiece.
As the honeycomb floor has no moving mechanical parts, there is nothing to wear out or breakdown, resulting in virtually 100% room availability.
The pneumatic conveying principal of the honeycomb floor also means that the abrasive is instantaneously recovered from the floor, eliminating abrasive "dead spots" and overcoming the need for large amounts of abrasive in storage.
Dust removal system
This machine adopts Cartridge or bag type dust collector, is exhausted air produced during working. The dedusting efficiency is up to 99.6%, powder density is less than 100mg/m3,much stricter than the national standard.
Electric control system
Set shot ball circulatory failure alarm function, if any parts of the system fails, the above components automatically stop running, to prevent the shot ball stuck and burning power device.
Our service:
| 1 | Reply your inquiry in 8 working hours. |
| 2 | Experienced staffs answer all your questions in time. |
| 3 | Customized design is available. |
| 4 | Exclusive and unique solution can be provided to our customer by our professional engineers and staff. |
| 5 | Special discount and protection of sales are provided to our distributor. |
| 6 | We are professional manufacturer of shot blasting Machine. Have a professional design team with more than 20 years experience engineers, competitive with good quality. |
| 7 | As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. |
| 8 | Prompt delivery, site installation and commissioning. |
Notice:
According to your requirements, the most suitable machine will be designed for your workpieces, please indicate the following details.
1. What kind of workpiece you clean?
2. The workpiece size, length, width, height and weight of maximum workpiece.
3. What's your production capacity per day (8 hours)?
Based on this detailed information, the detailed technical proposals will be sent to you for reference.
FAQ:
After-sale service:
1. Installation and commissioning issue: We will send one technicians to assist with machine installation and commissioning, customer pays for return tickets, hotel and diet. Customer need arrange skilled worker and prepare various installation machinery and tools.
2. Warranty time:12 months from date of commissioning completion, but no more than 18 months from date of delivery.
3. Supply full english documents: including general installation drawings, pit design drawings, manual book, electric wiring diagram, electric manual book and maintenance book, etc.
4. Exported experience : Many countries, such as The USA, Russia, UK, Ukraine, Australia, Malaysia, UAE, Egypt, Mexico, Brasil, etc.
5. Our shot blasting spare parts are high quality with Cr20S High Chrome, ZGMn13, Mn65, etc.
Trade Information:
MOQ: 1set.
Settlement Currency: USD, RMB, EUR.
Trade mode: FOB (FCA), CIP, CFR, CIF, DDU, DDP, Turnkey.
Payment term: 30% deposit by T/T, the balance paid before delivery or L/C at sight.
Delivery time: Within 20-60 days according to different type equipment.
Any question pls kindly contact with us and welcome to visit our factory!
George Xu
Cell: 86 13310666957