Product Type
G10(2.5mm) | G25 (1.0mm) |
G12 (2.0mm) | G40(0.8mm) |
G14 (1.7mm) | G50 (0.5mm) |
G16 (1.4mm) | G80 (0.3mm) |
G18 (1.2mm) | G120 (0.2mm) |
Product Application
Steel Grit | Application |
SG-2.5 SG-2.0 | Cleaning,rust removal and scale removal of heavy steel casting,foundry and steel structure. |
SG-1.7 SG-1.4 | Rust removal of large castings,foundry,heat-treated part,steel plate,steel tube and structure steel. Aoarnamental stone cuting. |
SG-1.2 SG-1.0 | Rust removal of small castings,foundry,heat-treated part,steel plate,steel tube and structure steel. Aoarnamental stone cuting. |
SG-1.0 SG-0.7 | Descaling of small casting,foundry,heat-treated part,cast steel alloy casting,steel plate and steel tube.Aoarnamental stone cuting.Surface strengthening and abrasive machining of the chain. |
SG-0.4 SG-0.3 | Cleaning and rust removal of ally casting,thin steel,band steel and stainless steel casting. improving the surface roughness and strengthen adhesion. |
Name | Cast steel grit | |
Chemcial composition | C | 0.70-1.20% |
Mn | 0.35-1.20% | |
Si | 0.40-1.20% | |
S | ≤0.05% | |
P | ≤0.05% | |
Average hardness HRC (Determination of 500 g load) | GP steel grit:42-50HRC(399-509HV) GL steel grit:56-60HRC(620-713HV) GH steel grit:63-66HRC(795-889HV) | |
Hardness deviation | The maximum deviation range i:±3.0HRC or ±40HV | |
Metallographic structure | Uniform tempered martensite or tempered Trendelenburg | |
Dmin | 7.4g/cm3 |
Steel Grit Types:
GP:Angular when new, this grit rapidly rounds off in use and its particularly suited descaling applications.
GL:Although harder then GP steel grit, also loses its sharp edges during shto basting and is particularly suited to descaling and surface preparation applications.
GH:Having maximum hardness, GH always remains angular in its operating mix. These abrasive are particularly effective in surface treatment processes and produce a uniform, etched finish, GH angular grit should only be used in wheel machines where working requirements take precedence over cost price considerations (for example with rolling mill cylinders or when a special finish is needed). For use mainly with compressed air equipment.
Packing
We also have steel shot,cut shot ,aluminum shot
Steel Shot | Steel Grit | Stainless Steel Shot | Steel Wire Cut Shot | Aluminum Shot |
Steel Shot0.3/0.4 | steel grit G12/14 | Material 202/Stainless Steel0.3/0.4/0.5/0.6/0.8/1.2/1.5/2.0 | Steel Wire Cut Shot1.0/1.2 | aluminum shot 1.0 |
Steel Shot0.5/0.6 | steel grit G16 | Material 410/Stainless Steel0.3/0.4/0.5/0.6/0.8/1.2/1.5/2.0 | Steel Wire Cut Shot1.5 | aluminum shot 1.2 |
Steel Shot0.8/1.0 | steel grit G18 | Material 304/Stainless Steel0.3/0.4/0.5/0.6/0.8/1.2/1.5/2.0 | Steel Wire Cut Shot1.8 | aluminum shot 1.5 |
Steel Shot1.2/1.4 | steel grit G25 | Material 430/Stainless Steel0.3/0.4/0.5/0.6/0.8/1.2/1.5/2.0 | Steel Wire Cut Shot2.0 |
|
Steel Shot1.7/2.0 | steel grit G40 |
| Steel Wire Cut Shot2.5 |
|
Steel Shot2.5/3.0 | steel grit G80 |
| Steel Wire Cut Shot3.0 |
|