Keystone Koating recently installed an upgraded in-line primer booth at its Lititz, Pa., location. The company has two conveyor lines with in-line primer booths that offer three types of primer based on the type of material: zinc-rich primer for steel, OGF primer for cast or galvanized material, and KW primer for aluminum. The lines can handle parts up to 1,000 lbs. and up to 20 ft. long, 6 ft. high, and 3 ft. wide.

The company also has added a monorail blast system at the Lititz plant. A third full-time employee has been added in the blast room to assist with part loading and unloading.

The FABRICATOR is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The FABRICATOR has served the industry since 1970.

Easily access valuable industry resources now with full access to the digital edition of The FABRICATOR.

Easily access valuable industry resources now with full access to the digital edition of The WELDER.

Easily access valuable industry resources now with full access to the digital edition of The Tube & Pipe Journal.

Enjoy full access to the digital edition of STAMPING Journal, which serves the metal stamping market with the latest technology advancements, best practices, and industry news.

Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.

© 2022 FMA Communications, Inc. All rights reserved.

Not yet registered? Sign up